Each clutch system includes a clutch unit, at least 1 fiberglass rod based on width of roman shade, a cord clip for each lift cord, a support bracket for each interior lift cord, 4 micro screw eyes, cord retainer and your selected bead chain.
All screws required to install your clutch parts to your dust board are included.
Printed instructions are not included but you can easily print them from this web site. Click Here to download the instructions to install the clutch system.
**The roman shade clutch system requires .9mm lift cord. Anything thicker will not fit the clutch system. Shade lift cord is not included in the system.** Click Here to order .9mm lift cord.
If you are receiving more than 1 fiberglass rod, you will automatically receive the appropriate number of rod splices.
If your rod is wider than 90", you will receive a 30 LB clutch system.